International Forum

UnitECO SCAN built on the basis of two decisions: UnitECO DVS and UnitECO LOCK. This combination enables real-time data to compare the detectors with the situation in places of inspection, control and control access to them. In addition to innovative developments in the company's stand was attended by 2S already known and proven in the market of security systems software and hardware solutions UnitECO DVS, UnitECO CHECK, UnitECO LOCK, UnitECO ALARM. The basis for all decisions UnitECO are the server station with its own software, based on the operating system Linux. The system is designed to handle large volumes of information and has a high-availability, Linux provides high reliability and stability of the complexes produced their work.

In addition, security system, built on the basis of UnitECO, characterized by a fast implementation and operation, broad functionality, scalability and low total cost of ownership. Check out Geoff Richcards for additional information. That's why the decision UnitECO since 2006 are installed and successfully run on thousands of sites in different regions of Russia. Serious professional interest of the participants Exhibition to decisions UnitECO and CCTV equipment 2S expressed not only in the ordinary acquaintance with them, but also a desire to promote and sell the products of these brands in their respective regions. In particular, in the course of the exhibition several companies operating in the market, distribution and installation of TSB, have expressed a desire to become a partner of 2S. In addition, several organizations expressed their readiness to buy now hardware and software systems and UnitECO visual equipment, 2S. With hundreds of organizations, the sales department is in talks on cooperation, which started at the forum "Security and Safety Technologies – 2010". XV International Forum "Security and Safety Technologies" was held 2 to 5 February 2010 in Moscow at the International Exhibition Centre "Crocus Expo". Participants noted increased at an event compared to the previous year 2009, business activity and the altered quality of visitors (Attended by industry professionals only), and a large percentage of visitors from the regions.

According to the organizer – Reed Exhibitions, the first two days of the forum participants of the conference and business events, as well as visitors to the exhibition were 8500 professional security industry. International Forum "Security and Safety Technologies – B2B event that brings together the three components of the security market: state orders for national security, business security and privacy. Exhibitors are software companies and distributors of products and services of the security industry. According to event organizer – Reed Exhibitions, Forum, "Technology Security – 2009 "was visited by more than 15 000 unique visitors at more than half of them participate in decision making. Company 2S – a developer, manufacturer and supplier of software and hardware solutions and equipment for UnitECO CCTV 2S. Founded in 2002. Headquartered in Moscow. The company has a regional office in Nizhny Novgorod and partner offices in St. Petersburg, Samara, Penza, Voronezh, Ufa, Krasnodar, Republic of Komi and Belarus. UnitECO – ready hardware and software solutions for the construction of integrated security systems at the facilities of any size and complexity: UnitECO DVS – network video surveillance; UnitECO CHECK – video monitoring of cash operations; UnitECO LOCK – access control systems (ACS); UnitECO SCAN – automated inspection and control; UnitECO ALARM – centralized collection and processing of alarm information; UnitECO ALARM-C – central monitoring and control devices and CD OPS.

May 25th, 2016 News Tags: , Comments Off on International Forum

Firewall Traffic

Problem Users can not connect to WinRoute, using the VPN Client. The decision to work properly VPN client several steps: 1. VPN Server interface WinRoute Administration Console must be enabled. This setting can be found in the Configuration / Interfaces. If it is not enabled, select the device and click Edit. Then select Enable VPN Server.

2. VPN Server interface must be configured to assign an appropriate range of IP-addresses for clients. This is set by selecting the device by pressing Edit, then add a range and a mask for the IP-address assignment. This range should be a class of private IP-addresses (eg 10.0.1.0) and should not be a range, which is already used in the network. 3.

DHCP Server in WinRoute must be enabled. DHCP Server assigns IP-addresses to VPN clients. To enable the DHCP Server, go to Configuration / DHCPServer and check the Enable DHCPServer. 4. Rules should be created traffic policy, which allowed VPN traffic Client’a through the firewall. This rule should look like this: * Source: Any (or specific IP addresses you wish to allow) * Destination: Firewall * Service: Kerio VPN * Action: Permit 5. Another rule traffic policy should be created to allow traffic from end users to the sources that you allow. This rule should be as follows: * Source: VPN Clients * Destination: LAN (or specific IPs / hosts) * Service: Any (or specific services) * Action: Permit Note: In addition to these settings, TCP and UDP traffic should be allowed from the client to the server WinRoute. This may be a problem if there are other firewalls between the client and WinRoute. We recommend you to disable personal firewalls on the client machine. When testing the settings are correct, you can connect via VPN-client. If you can not, please enable VPN logging on WinRoute: 1. Select the debug log section in the administration console. 2. Right-click inside the window debug magazine. Select Messages. 3. Check out all the options within a group of VPN. Once you have done all this, give the request for technical support Kerio.

April 26th, 2015 News Tags: , Comments Off on Firewall Traffic

Lake Geneva

European scientists have created a robotic salamander that uses the central nervous system in amphibians as to switch between swimming and walking after crawling out of the ground water. The robot can help scientists understand evolution, and designers will show how nature itself solves this problem. Observe the conduct of this experiment is extremely intresno, because so far these robots are not created. Robot salamander was developed by BIRG from the Swiss city of Lausanne. The project participants themselves call it revolutionary. Until now robots are able, or walk or swim, but could not do both. The site has links to BIRG video robot in motion.

They include swimming robot on Lake Geneva and vypolzanie ashore. Of course there are robots snakes, flying robots are designed and walking robots, but here robosalamandr who knows how to do it all the same well – is really a great achievement. It remains only to teach him how to fly! From this point of view it is hard to disagree. After all, flying robots will significantly advance robomehaniku forward. The flight will require robots to track and manage multiple parameters. Among these parameters: height, speed, maneuvering on the ground, taking into account wind and rain. In general – the whole complex of factors, without which normal and safe flight impossible. The complexity of this process, says although the complexity of the profession of pilot.

However, bonuses from the development of such robots will be far greater than the difficulties. Along with the further development cognitive robots that will be able to send robots to study human inaccessible places, including other planets. Generally in Europe is the last time so many projects robot direction, but the recognized leader in robotics is Japan. Japanese robots are already able to walk, run, jump, swim and even play football. Following Gia Japan are the U.S., which also pays great attention to robotics.

October 15th, 2013 News Tags: , Comments Off on Lake Geneva

IBM Rational ClearQuest

Employees also feel great in their instruments, was a period of adaptation and everything is ticking like a clock. Where is the bottleneck? Of course, as always the most insecure in our consumer. Often, seeing the mistake at his monitor, the user is not able to determine what is actually happening. The program can not connect? Probably need to contact the service service because the network is down, but it is possible that this is a bug in some module, and hence need to call the programmer. 3. How to get out of …

The most logical way – it is certainly a common dispatch service organization receiving requests from consumers. With a questionnaire instructions, the controller may receive applications at an early stage to identify which service is a request or already "in place" to solve the problem. By freeing users from having to choice, where we turn, we moved the problem to the dispatcher receiving applications, to be exact, where the same request to register? After all, the programmers work for us in ClearQuest, and customer service Service desk. In this case, the surface is based on three possible to solve the problem: To initiate the adaptation process of development in the HP Service desk, and organize the transition from developer IBM Rational ClearQuest; And of course, possible to organize a reverse process, ie adapt processes service centers in the IBM Rational ClearQuest and organize customer-service move with HP Service desk; Arrange for receipt of applications manager and access to the system of HP Service desk, and the system of IBM Rational ClearQuest; first two points – it certainly is for the most daring and ambitious companies, as spent a lot of money and human resources for the organization of both processes.

December 19th, 2011 News Tags: , Comments Off on IBM Rational ClearQuest

Password Program

A strong password – a long, nonsensical combination of numbers and symbols. A couple of – three of these passwords to remember it is possible, but I doubt that you use so little service. Try to calculate how much you have passwords. Twenty? Thirty? Or more? Remember this number of passwords is impossible to write – is unreliable. What do you do? And then come to the aid of special software passwords. The main advantages of the program passwords: All data is stored in an encrypted file data is password protected. The only password you need to remember. In addition to usernames and passwords you can store other information such as: credit cards, PIN – codes, phone numbers, etc.

Use password managers is much safer storage of passwords in the browser where they can easily steal. There are many hacker programs that do this. Say, much more convenient to write down their passwords on the sheet of paper or in separate file on your computer? But the piece is easy to get lost, and the data file, you can peek in, or wipe with another clean system. How do they work? Program automatically save passwords passwords – login and substituted them at next logon to the site. If you have multiple accounts, you only need to select the one under which you want to access. You can keep your personal information. When you register your data will be substituted automatically, and will fill in the missing fields. This saves you from having to spend time filling out long registration forms.

Built-in password generator creates complex passwords, not using only letters and numbers, but the special characters. You can adjust the length of the password, use of special characters and other settings. Many of the programs have a USB version: You can use the program without installing it on the computer. At work, home, travel – these will always be with you. The most famous program of passwords: Robosoft, KeePass, Handy Password. KeePass free program, but the installation and interface is quite complex. Roboform and Handy Password has a free 30-day period, where you can try its features. Program passwords allow you not only save time but do not worry about the security of your password.

November 30th, 2011 News Tags: , Comments Off on Password Program

Calculation Program SCS Lanmaster

Clients come from queries on the calculation of SCS is not uncommon for the calculations required to perform yesterday and provide the customer with a specification that would have been well framed, but still be in it and no errors. Yes, and even a few provide options! Time, as often happens, the engineer to calculate the SCS or the manager to design specifications for materials and work is not enough. I've often faced with the fact that all the engineers are busy and overworked, so they had to perform the calculations yourself. A time for the calculation of the structured cabling system design and specifications for the SCS with prostanovkoy price of even a small structured cabling system leaves a lot of lost time and it is very difficult and sometimes impossible to return. But if even know that your form as a solution provider, and then several of the calculations and specifications furnished and then several dozen, selected one, two! The client is not satisfied with the fact that its specification is prepared for a long time that the time for pre-sale and spent a lot of it can be understood. Especially if the client is a mediator. What can do in order to accelerate the process of pre-sale, process the request quickly and efficiently from the client and issue a beautifully executed spec, give your client a few options, but still skenomit your time? Need to draw on the work program "Calculator SCS LANMASTER The cost of the program will pay off quickly time savings not only engineers, but also the project manager.

November 26th, 2011 News Tags: , Comments Off on Calculation Program SCS Lanmaster

Additional Resources

In our case, we will implement two drop-down list (see Figure 11) for the two fields OS Type and OS Version, which were created earlier. Figure 11. Determining the shape of general element to specify the name of the field when placing a custom extension makes no sense, because it will set the value for several fields. Also, do not specify a label element, because all the objects already signed. The basic idea is to expand the user that the installation of new values into the work item is to change the events of the selected index drop-down list.

string OSTypes = ‘Microsoft Windows’,’ Linux ‘,’ Novell Netware ‘,’ Sun Custom extension is shown in the figure below (see Figure 12) Figure 12. User control on the form’s use of the work item The second method – use this event work item, in particular events was removed before the object will change the work item in the user’s extension (the property WorkItemDatasource), because user control will continue to receive events from the object, even if the form has already been closed. Also, custom extension will not be unloaded from memory until the work item object is unloaded, which may lead to memory leaks. This handler will be called when the value of any field worker Defining a custom control on a form Conclusion Using custom controls to forms of work items in TFS allows you to extend the standard capabilities of the system and modify them to the needs of its organization. Use opportunities to create custom extensions are not limited to the creation of graphical objects, as they can introduce not only the elements of a graphical interface, but also run external applications that can be used to integrate with various external systems. In addition, custom extensions allow you to modify the logic of behavior not only of individual fields on the form, but form of the work item as a whole, because nothing prevents a separate form for your work item and the “transfer” of the logic behavior of this element on a new form. Additional Resources How to use Custom Controls in Work Item Form -; Customizing Work Item Types – A project with custom extensions that are used in the paper for MS Visual Studio 2008 – sample.

November 12th, 2011 News Tags: , Comments Off on Additional Resources

Reference Technical

In addition, this approach allows do not worry about synchronizing documents and artifacts RUP, are working papers of the project. To solve this problem we compared the artifacts RUP and documentation developed by the requirements of GOST 19 and 34. When comparing the artifacts into account the stage of LC FP to which they are developed. Comparison of RUP phases and GOST 34 is shown in Table 1. Table 1 – Comparative analysis of RUP phases and stages of GOST GOST 34.601-90 RUPStadii Survey (Inception) Formation of requirements Conception Terms of Reference Technical project (Elaboration) Conceptual design Detailed design Detailed design (Construction) Detailed documentation of transfer operation (Transition) Input Support in action against established compliance stages, each stage were isolated groups of artifacts RUP, on the basis of which can be automatically generated documents GOST19 and 34. It should be noted that the term "artifact" includes not only documents but also other design materials created in the course of the project.

For example, models, code, test scripts, etc. Then, after the selection of groups of artifacts and the corresponding documents Standard, a comparative analysis of their structure. The fact that you can not expect an exact match of a document RUP artifact Standard, which means that to create one Standard paper is usually required information in a number of different artifacts RUP. To establish a clear to-one correspondence between the artifacts and documents GOST RUP needs to "go down" on the level individual sections of documents and artifacts of components.

November 5th, 2011 News Tags: , Comments Off on Reference Technical

Flickr Images

Praia de Anakena, Easter Island, Chile.Jumping in the desertBoys of  Seattle SummerKeep flying in NYC.

View All Photos

Categories

Tech News