Thermal Insulation Thermal

During the heating period through the exterior building envelope is inevitable heat losses occur, which range from 30 to 80% of the lost energy. The system allows better insulation to reduce These characteristics, and accordingly, as well as spending more than 5 times. Badly insulated exterior walls contribute to the creation of an unfavorable climate in addition to the indoor condensation, which results in is the wetting of building elements, as well as mold. These problems can be solved by adequate insulation of exterior walls. With insulation of facades cottages meneralovatnymi plates significantly as reduced noise pollution. For even more details, read what Peter Asaro says on the issue. The facade of a house can be warmed in 3 ways: inner insulation, outer insulation, and insulation structure inside the wall. For the most part wish to be given external insulation systems, as they have several advantages: protect walls from adverse environmental impacts (air, temperature, and biological); protect the walls from cooling, which prevents condensation on the inside surfaces, provide a “breathing” walls, as well as, of course, additional sound insulation, as well as long-term use. Facade insulation systems depending on the technology can be divided into the following groups: – light plaster insulation system – heavy plaster insulation system – ventilated facade construction.

In light of plaster slab insulation systems of insulation is fixed to the wall with glue and dowels, and then covered with a thin layer of plaster. The total thickness of the layers does not exceed 15 millimeters. As can be seen that the heat insulating material in the facade systems are presented the highest orders. To perform installation of highly light plaster systems need workers with relatively high qualifications, as one must apply uniform plastering and durable fiber glass-reinforcement on. Plate heater in heavy plaster system is attached with steel mesh reinforcement, and anchors. The thickness of the layers of insulation after sometimes can be up to 50 millimetrov.V this facade system carrying metal mesh guard topcoat of linear thermal strain.

Here, as well as in light plaster systems, has heightened indications of insulation. Ventilated facade system is similar to kolodtsevuyu masonry with an air gap, only instead used all kinds of exterior wall covering materials (boards or sheet material). Thermal insulation is fixed to the wall with the supporting framework, as well as the anchor fastening system. Such a heating system Facade provides ventilation of the inner layers, as well as helps to remove moisture, which saved the insulating properties of insulation and walls, as well as improves the appearance of the walls, and, importantly, increases the life of insulation (up to 70 years!) depending on the material used. Used in modern construction of external insulation cottages provide an opportunity to not only effectively solve energy conservation, as well as provide opportunities for architects, designers as well as to create a completely new image of the cottages, making them inaccessible to earlier forms. The materials are certified brand THERMO fire safety, sanitary-epidemiological certificates, certificates of radiation safety, as well as technical certificates Rosstroya RF.


No Responses to “Thermal Insulation Thermal”

Comments are closed.

Flickr Images

NORAA Competition, Dumaguete, Philippines20151122142038-3gsRCA VS DHJLeBoom Branchez - 32115 - B Schwartz (38)

View All Photos

Categories

Tech News